Concertina v0.7.0 caps, fresh off the printer

Subject image

A set of keycaps for a Concertina v0.7.0, as defined by dmote-keycap v0.5.0, with slight differences to compensate for Concertina #2 being made partly of prototypes: Some of the caps are extra tall.

The grey caps are made of add:north X-PLA for the left-hand side and the burgundy caps are made of add:north “Red Metallic” Amphora for the right-hand side.

These were all printed in sequence (“one at a time”), mainly using 0.07 mm layer thickness and brims and DFM supports (shown still attached).