Keycap jigs mounted on board

A pair of sanding jigs like six Behelits, mounted on a scrap piece of wood from a trashed IKEA “SULTAN LADE” bed base.

Both of these jigs are prototypes, but nearly identical to those produced by dmote-keycap v0.6.0, albeit with non-standard parameters:

lein run --jig-mode --jig-lanes 3 --paper-width 22

Printed in FormFutura FlexiFil on a Makerbot Replicator 2.

In galleries:

	Keycap prep illustrations keyboard
	Build guides